Archive for March, 2010

Finish Installing Guest Room Floor

Sunday, March 14th, 2010

The first order of business today was to mill the splines to join the two grooved sides of the planks in the closet and nook. Pops had been sketching out the design using a scrap piece of wood last night. With his test piece in hand, we headed down to the workshop to see how we could make this work. The tongue is tapered and rounded at the end with the groove being shaped to match, so it’s not as simple as cutting a thin rectangular strip of wood that is twice the width of a tongue. With some trial and error, we were able to get the angle and blade height set on the table saw to get very close to what we needed. With some additional sanding, we had two pieces of spline that fit snugly in the groove but left some room for expansion:
IMG_7660_spline
After test-fitting the new splines in the pieces that would be joined, we headed out to breakfast at Betsy’s.

When we returned home, we got right back to work getting the rest of the floor done. We only had 3 full boards plus a 1-1/2″ filler in the closet and in the nook to get installed and that went pretty fast. We cleaned up all the tools, vacuumed up the sawdust, and we were admiring the new floor by 3:00.

IMG_7664_Installed

Now all we have to do is get the floor finished. After seeing how bright the room is with the pine, we’re reconsidering whether we should use the dark brown stain that we had planned to apply. My father suggested white-washing the floor, which would be totally appropriate for a Cape. Now we have some decisions to make. Stay tuned to find out what happens…

Begin Installing Guest Room Floor

Saturday, March 13th, 2010

I got up early today and got the guest room set up for installing the floor. I cleaned out all of the painting supplies and brought up the necessary tools for the flooring project. I checked in with my father, who was coming up to help with the installation. He was just leaving and would be arriving in about 2.5 hours.

The timing was perfect, because before I could get started on the floor, I had to head out into the warm nor’easter to help a fellow 300 Committee land steward erect an osprey pole on the parcel for which he is a steward. I was especially excited to help because it’s a parcel about a mile south of our house on the same salt pond. There were plenty of people on hand and the installation went quickly.

Pops beat me to the house by about 15 minutes, and when I got home, we got started right away. Once again, we are dealing with a 90-degree intersection between the floors and we needed to be certain that we would be perfectly square in the doorway. Initially, I was planning to start on the far side of the room after laying some careful baselines and hope that things were still square by the time I got to the doorway. That way, I would only be face-nailing in the closet and in the nook that will probably be covered by a built-in (someday). Instead, we decided to start on the other side of the room with the first board in the doorway. This would require us to make some splines to reverse the direction of tongues into the closet and nook, but we decided that would be easier and safer than my original plan.

After hauling the 16-footers out of the basement (wrapped in plastic to protect the wood from the driving rain), we got started on the floor:
IMG_7653_Pops_First_Board

We have enough long boards to span the whole room for all but three rows of the floor. Rather than cutting some of the longer boards to establish a balanced pattern, we decided to tuck the three short boards in the corner of the room where the bed will likely be so they’ll never be seen. The first board illustrated a slight problem with the squareness of the room, but we were able to get the board nailed in with a difference of less than 1/4″ to the far wall:
IMG_7654_First_Board

IMG_7655_threshold_detail

We had a little bit of trouble with the boards that met the hickory in the doorway. The smaller hickory board in the doorway was not quite square to the room and maybe not cut quite straight either. There are many possible causes for this that we didn’t bother to investigate. We just soldiered on, marking and sanding each board to match the angle and contours of the threshold:
IMG_7656_fine-tuning_the_threshold_joint

The pine went in very easily. It took about 50% of the effort to put each nail in, and aside from the few boards that we had to cut for the threshold and the two around the heat vent, it was just a matter of chopping one end and gluing and nailing the board. We only paused for a brief burrito break in the middle of the afternoon. By evening, we had made our way all the way across the room and we decided that was a great place to stop:
IMG_7658_end_of_day1

We Finish Painting (On Time!)

Saturday, March 13th, 2010

I got up early this morning and headed down to the guest room to flip the stacks of pine and get a coat of finish on the rest of the planks before work. I have to say that I’m loving working with the water-based polycrylic. I’m not sure that I like the look of it (but it’s just the bottoms of the planks so I don’t really care) but the lack of the noxious odor is fantastic!

When we got home from work, I stacked the pine in the middle of the room and covered it with plastic. I headed down to the basement to finish the bottoms of the remaining four planks. After a quick dinner, I got started painting the second coat on the walls. Tina was still scrambling to finish up a poster that our boss needed to take to a conference, so I was on my own for the beginning of the night. I feel less confident about my painting skills when compared to Tina’s, so I started in the closet for practice. I also moved very slowly. Tina came in when she was finished with the poster and took over rolling. We got through the whole room by 1 AM. We had totally transformed the walls in ceiling in less than a week. Best of all, we are ready to start installing the floor later in the morning (but not before a few hours of sleep).

Even More Painting and Wood Sealing Too

Thursday, March 11th, 2010

We had to leave work a bit early to take Lilly to the vet for her annual exam. While we were out, we stopped at Sherwin Williams to get the paint for the guest room and some Minwax Polycrylic for the floor bottoms. When we got home, Tina started painting in the guest room and I went down to the basement to start coating the bottoms of the floor boards. We had 8 16′ planks in the basement (because they didn’t fit anywhere upstairs). I had to clean up the workshop and get the big tools out of the way so I could stack them in four piles, face to face, on the floor. Once I had everything set up, I set to work finishing the bottoms. I was having difficulty seeing what I had done because of the poor light and the fact that the pine didn’t change very much when I applied the finish. As a result, it took much longer than I expected as I needed to be extremely careful not to miss any spots and not get any finish on the tops.

Once I finally finished the four boards that were on top of the piles, I headed upstairs to help Tina with the painting. She was about half-way done with the room. I took over the cutting brush and she continued rolling. By 10:30, we had finished the first coat on the walls.
IMG_7652_guest_room_walls_floor_bottoms

After cleaning up the painting tools, we moved the shorter pine planks from the stack behind the couch to the floor of the guest room. With the boards spread out, I put a coat of finish on the bottoms of half of the boards.
IMG_7651_guest_room_paint_floor_bottoms

With that task wrapped up around midnight and still on track to finish on time, we gave up and went to bed.

More Painting

Wednesday, March 10th, 2010

We had another marathon night of painting tonight. I got started painting the ceiling right after work while Tina took Lilly for a walk. When she got back, she took over cutting duties so I could concentrate on rolling. We had a quick dinner and then went through the room and painted the trim. I waited the necessary four hours and started the second coat of the ceiling at 10:30. We had everything cleaned up around midnight. Another night of hard work and we are still on track to meet our goal of installing the floor this weekend.

Priming the Guest Room

Tuesday, March 9th, 2010

After a nice long walk with Lilly and a delicious dinner, Tina and I kicked into high gear got to work priming the guest room. My father has offered his assistance installing the floor this weekend and we really want to be ready for the help. Once again, we’re using BIN on the ceiling and walls to get rid of the funky smell (which has mostly gone away now). The worst part of the whole process is dealing with the fumes. Our respirators block the smell but our eyes were burning! We were able to get through the whole room in 2.5 hours. We finished up around 10:30.

Tina might have felt overwhelmed at the start:
IMG_7648_Tina_gets_ready

We had many test patches of paint to cover up:
IMG_7649_Preparing_to_prime
and:
IMG_7650_All_the_colors

Guest Room Wall Prep

Saturday, March 6th, 2010

Tonight, Tina returned to fixing the walls in the guest room. She continued patching where I had stopped and fixed some of the patches I had started on the larger holes that hadn’t turned out quite right.

Of course, she had plenty of supervision:
IMG_7624_Tina_patching_walls

IMG_7626_supervisor1